-211x150.jpg)
- Stock: In Stock
- Model: SML
- MPN: SML-48BR-VEN
Available Options
The Grand Canyon Summit Linear w/ Bedrock Contemporary is a factory-built, B-vent linear gas fireplace built around the Bedrock Contemporary burner. Available in 48", 60", and 72" models in both natural gas (VEN) and propane (VEP), it’s a complete, framed-in fireplace chassis with a clean, low-profile burner deck designed for ½-inch reflective glass or lava media instead of traditional logs. The look is wide, modern, and minimal, with a line of flame that reads across the full width of the opening.
Each Summit Linear is a decorative 12" B-vent appliance, not a sealed direct-vent box, and uses a variable electronic ignition system with SIT Proflame II controls, flame-height modulation, and an included multi-function remote. Depending on size and fuel, Bedrock Contemporary Summit models are rated from roughly 60,000 to 90,000 BTU/hr on high, giving substantial flame presence in larger rooms while remaining primarily an ambiance product rather than a primary heat source.
The Bedrock Contemporary configuration requires a continuous bed of ½" glass or lava over the burner deck and may be finished with approved decorative media such as cannon balls or driftwood accents above the glass (never glass under cannon balls). The SML chassis, Bedrock Contemporary burner, and media are all part of a single integrated system and must be installed in accordance with the Summit Linear framing, clearance, and venting requirements outlined in the manual, using a 12" B-vent system and a fully qualified installer.
| Product Details | |
| Type | Complete Linear Gas Log Set |
| Log Style | Summit Linear (SML) |
| Fuel | Natural Gas (NG) or Propane (LP) |
| Certification | ANSI Z21.60 / CSA 2.26 Decorative Gas Appliance |
| Ignition Type | Millivolt, Modulating Millivolt, MVKEI Battery, or EIS 24V Electronic Ignition |
| Availability | Special Order |
| BTUs | 60,000–165,000 (varies by size and fuel) |
| Burner Type | Bedrock Contemporary Burner (Linear Series) |
| Fireplace Location | Indoor or Covered Outdoor |
| Included | Linear burner, Summit logs/media, LED lighting kit, lava rock or glass media, flex line, fittings, rating plate, and manual |
| Material | Ceramic-refractory logs with steel reinforcement; 304 stainless steel burner |
| Venting Type | Vented Decorative (Masonry or Linear Fireplace) |
Refractory Gas Logs
Lifetime warranty when installed indoors; 5-year warranty when installed outdoors. Normal color change from use is not covered.
Fiber Products (Cannon Balls, River Stones, Fiber Logs)
5-year warranty indoors; 2-year warranty outdoors. Normal color change from use is not covered.
GlowFire™ Logs
Ceramic-fiber construction. Lifetime warranty indoors; 2-year warranty outdoors. Normal color change from use is not covered.
Domestic Standard Gas Log Burners (coated steel; excluding controls)
Lifetime warranty when installed indoors by a professional; 1-year warranty when installed outdoors. Paint/finish is not covered. Assembled Systems (ASM) have separate burner vs. control warranties.
Domestic Stainless-Steel Gas Log Burners (-SS; excluding controls)
Lifetime warranty when installed indoors, in an outdoor fireplace, or outdoor-type room (e.g., two-/three-season rooms) by a professional. Stainless finish will brown/age with use.
Athena Stainless-Steel Fire-Pit & Fireplace Burners
5-year warranty against manufacturer defects or breakage when installed by a professional (indoor, outdoor fireplace, or outdoor-type room). Stainless finish will brown/age with use.
Valves, Pilots & Electrical Components (excluding batteries)
2-year warranty for indoor installations; 1-year for outdoor. Coverage applies only when used with Grand Canyon burners and logs. ODS pilot assemblies carry a 1-year warranty.
